Wood Log Bark Peeler for Plywood

     Cold press machine is the auxiliary in plywood production line, which is used to shorten the cycle time of hot press and improve the quality of plywood before gluing board. Cold press belongs to the pressing machine. Cold press machine is mainly used to press the gluing veneer, so that make the initial shape, and then into the hot press machine to press. It is important to improve the quality of plywood, and it is an significant part. Cold press machine in general consists with the rack, fixed beam,moving beam, the plate device, cylinder and hydraulic system, electric control device components

Machine parameter

1. Most of the electrical components of this machine are chosen from Schneider or Chinese famous brands which are stable in operation. 

2. The hydraulic cold press works with low noise, fast lifting speed, strong pressure stability and low maintenance rate. 

3. Because the foreign voltage is different from our voltage, most of the domestic manufacturers only change the motor and don't care about the other electrical components, when customers use the cold press in the factory, the electrical components are easy to be heated and finally burned. And this will not happen to our cold press.

4. Equipped with automatic loading and unloading machine, it is convenient to convey and saves time and labor. 

5. With over-pressure automatic control circuit and pressure oil cut-off protection, automatic lifting and oil cut-off. 

6. Fast and efficient pressurization, emergency safety brake, stroke limit device. This machine is used for pre-pressing process of making plywood, also blockboard and decorative board.

                                       

HAVE A PRESSURE DEVICE

      Horizontal pressure device, when log diameter issmall, need it to keep log in straight, ensure theveneer in high quality

MAUNFACTURING PROCESS

    All parts are laser cut, and the robot arm is automatically welded to ensure that each peeling roller is balanced by a dynamic balancing machine. After the test machine before leaving the factory, it can be produced after landing.

                                        

               

WIDE INLET

    The open silo can be used to feed in from one end and discharge from the other end in a streamlined operation. It overcomes the shortcomings of the existing drum-type peeling machine that the feeding and discharging work in stages after power failure, and can be operated continuously.

THICKENED ROLLER

       Hydraulic station,includes motor,oil pump and valve block etc.High quality from famous brands.     Hydraulic station uses TAlWAN hydrau-lic technology.lt uses Sicmens brandmotor KINYUN solenoid valve,TAIWANHEANG bydraulic

    Our plywood cold pressing machine and plywood machine are exported to many countries like Malaysia,Indonesia, Russia, Turkey ,Brazil, Argentina, Paraguay and so on.

plywood packing cold press machine

Veneer packing cold press machine

---

Spindleless peeler

Veneer dryer

Veneer composer

Hot press

Glue spreader

plywood trimming saw

Automatic putty line

Calibrating machine

Shandong kindle Machinery manufacture limited company 

located in Linyi national Economic and Technological Deve-

lopment Zone, it was founded in 1998 which specialized in

research and development of veneer peeling machine for 26

years. It have obtained more than 60 national patents , it covers more than 30000㎡ area and have 15 R&D technician and 30 professional engineer for installation and machine maintaining.

We are committed to provide complete solutions for veneer

peeling line, plywood making plant,LVL,block board, PB,OSB production Line etc. Main equipment include: Log cutting saw, log debarker , spindle peeling lathe and spindleless wood veneer peeling machine,veneer dryer, glue spreader,pre-press, hot press, veneer commposer,plywood saw, sanding machine, boiler, and related plant accessories and materials, etc.

FAQ:

---

Q1:Are you machine manufacturer or a trading company?

A1: we are a factory which is special for producing veneer peeling machine and plywood machine,Jinduo company own 2 workshops and 1 trading company

Q2:What is the delivery time?

A2:In generally speaking , the complete veneer product line need about 30 days to manufacture after getting deposit.

Q3: what is the maintenance period and what kind of after sale service can you supply?

A3: the machinery part maintenance will be sustained in one year after installation and we have abroad warehouse and office for spare part in brazil and Russia, our engineer will arrive your factory to maintain the machine at first time if have problem.

Q4: what is the payment term?

A4: we can accept TT with 30% deposit and 70% balance against loading bill or 100% irrevocable L/C at sight.

Q5:can we visit your factory?

A6: Jinduo company is next to linyi airport, we can pick you up from airport to our factory at any time, welcome to visit us.